Below Ground Room Sized Up To 25 m3
DSC_0324
12711006_770732339698812_9002278309755746720_o
DSC_0207[1]
12711254_770731853032194_5134087379666863586_o
20151118_142146
12696958_770730943032285_848567825830826091_o
DSC_0060
20151124_160722
£1,495.00 Fully Installed + VAT
2.85kw SlimLine System Fully Installed Anywhere in UK*
*Surcharges for London, Cornwall, Scotland & Wales - See below for information

Installation Details

 

Your installation will include the following:

 

  • Decommissioning and removal of existing system

  • Mounting the evaporator and condenser

  • Placing the pipework, insulation and wiring.  The indicated price allows for the drilling through a single brick/ stone wall (65mm hole up to 500mm deep).

  • Connecting the system to an electrical supply (within 5 meters of the indoor unit)

  • Placing the waste pipe to suitable location (within 5 meters of the indoor unit)

  • There may be a surcharge of up to £395.00 for London (Within M25), Scotland & Wales; please contact for more info, or look at the out of area surcharge page under "Price List".

 

The system

 

This is a 2.85kw "SlimLine" system.  It incorporates a small twin fan evaporator to take up minimal space in a small room.  The smaller indoor unit is also quieter than the larger units, perfect for micropubs where the ambience is important, and you don't want a loud unit in the background.  The indoor unit has a digital controller where you can monitor and control the room temperature

 

  • Silent & Compact Indoor Unit

  • Silent Outdoor Unit

  • Digital controller to monitor and control the room temperature

  • 3 Year Manufacturers Guarantee (Parts Only - Alongside VOLLAND Ltd 1 Year Parts + Labour Guarantee)

 

What’s is supplied

 

This price includes the system (condenser and evaporator), up to 10 meters of copper, insulation & wiring and brackets or mounting blocks for the condenser.  Systems with piperuns over 10meters may occur further charges.

 

What we would require on site

 

A 16amp supply will be required in the room where the indoor system is to be placed.  Furthermore, the evaporator (indoor unit) produces water and will require access to drainage within 5 meters; such as an external wall, drain pipe or cellar drainage.  If replacing a system we can use your existing electrical supply and drainage, but it is still your responsibility to make sure they are in place and suitable for this system.

 

When replacing existing system

 

We will decommission, remove and dispose of any existing system that we will replace for no extra charge.  If the pipe work is in good condition we may choose to re-use it.  We will also use the existing power supply and drainage which the old system utilised.

 

Notes before placing an order

 

  • The pipe length for these particular systems cannot exceed 15m; if your pipe length exceeds 15m please contact us for alternative systems.

  • A route must be planned by yourself & accessible for our pipe run.  If replacing an existing system the existing pipework must be exposed so we can easy replace it or re-insulate it.

- Give us a call -

 

01529 497347

2010 - present

2010 - present

Price List

Case Studies

Blog

Contact

Contact Us

Copyright © 2015 All images and content are the property of VOLLAND Limited


Registered In England & Wales. Company No: 06515074. VAT Registration No: 930 6432 42


The Laundry House, Folkingham, Sleaford, Lincolnshire, NG34 0SG